Recently added item(s)
A shank with a screw-like head. Used primarily with Dremel polishing bits and accessories. For best results, insert the mandrel all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto. Simply remove the screw, line up a cut-off wheel or sanding band over the hole in the shank, and replace and tighten the screw.
Dremel Mfg. Division Mandrel:409,411-413,420,423,425,426, DRE402
- Shank with screw-like head
- Use with discs and wheels
- Plenty of shank for the collet or chuck to hold onto
