Dremel Mfg 109 1/16-Inch Diameter Engraving Cutter Rotary Power Tool Accessories


Warning: Use of undefined constant asin - assumed 'asin' (this will throw an Error in a future version of PHP) in /home/dremel/public_html/wordpress/wp-content/themes/azlnr-ruggedzon/wpaz/wpaz.php on line 1939

Warning: simplexml_load_string(): Entity: line 1: parser error : Space required after the Public Identifier in /home/dremel/public_html/wordpress/wp-content/themes/azlnr-ruggedzon/wpaz/wpaz.php on line 1982

Warning: simplexml_load_string(): <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> in /home/dremel/public_html/wordpress/wp-content/themes/azlnr-ruggedzon/wpaz/wpaz.php on line 1982

Warning: simplexml_load_string(): ^ in /home/dremel/public_html/wordpress/wp-content/themes/azlnr-ruggedzon/wpaz/wpaz.php on line 1982

Warning: simplexml_load_string(): Entity: line 1: parser error : SystemLiteral " or ' expected in /home/dremel/public_html/wordpress/wp-content/themes/azlnr-ruggedzon/wpaz/wpaz.php on line 1982

Warning: simplexml_load_string(): <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> in /home/dremel/public_html/wordpress/wp-content/themes/azlnr-ruggedzon/wpaz/wpaz.php on line 1982

Warning: simplexml_load_string(): ^ in /home/dremel/public_html/wordpress/wp-content/themes/azlnr-ruggedzon/wpaz/wpaz.php on line 1982

Warning: simplexml_load_string(): Entity: line 1: parser error : SYSTEM or PUBLIC, the URI is missing in /home/dremel/public_html/wordpress/wp-content/themes/azlnr-ruggedzon/wpaz/wpaz.php on line 1982

Warning: simplexml_load_string(): <!DOCTYPE HTML PUBLIC "-//IETF//DTD HTML 2.0//EN"> in /home/dremel/public_html/wordpress/wp-content/themes/azlnr-ruggedzon/wpaz/wpaz.php on line 1982

Warning: simplexml_load_string(): ^ in /home/dremel/public_html/wordpress/wp-content/themes/azlnr-ruggedzon/wpaz/wpaz.php on line 1982

Get The Best Deal
See Special Price
$2.29
 
BUY FROM AMAZON

Ideal for detail engraving, carving and routing in wood, fiberglass, ceramics, plastic, jewelry and soft metals. Not for use with hardened materials. Use higher speeds for hard woods, slower speeds for metals. Use higher speeds for hard woods, slower speeds for metals. 1/8″ shank. User Tips: Secure objects to a stable surface while working For best results, insert the accessory bit all the way into the tool and then back it out slightly before tightening down. This provides plenty of shank for the collet or chuck to hold onto the bit Use the sides of the cutter (rather than the tip) for effective cutting. The tip cuts poorly and can break under pressure Use higher speeds for hard woods, slower speeds for metals and very slow speeds for plastics (to avoid melting at the point of contact) If chattering occurs, increase speed. Specifications: Bit diameter inch: 1/16″ Bit diameter mm: 1.6 mm Description: Engraving Cutter RBU: RT Shank diameter: 3/32″, 2.4 mm.Secure objects to a stable surface while working

Home » Accessories » Engraving » Dremel Mfg 109 1/16-Inch Diameter Engraving Cutter Rotary Power Tool Accessories
TedsWoodworking Plans and Projects